From 02ad565b49c916d9e1ca83c2486e6b0e388eb8e8 Mon Sep 17 00:00:00 2001
From: Vegard Storheil Eriksen <zyp@jvnv.net>
Date: Thu, 31 Mar 2011 13:52:25 +0200
Subject: Initial import.

---
 board.h | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 board.h

(limited to 'board.h')

diff --git a/board.h b/board.h
new file mode 100644
index 0000000..06f9c24
--- /dev/null
+++ b/board.h
@@ -0,0 +1,96 @@
+#ifndef BOARD_H
+#define BOARD_H
+
+#define STM32_HSECLK            8000000
+
+#define STM32F10X_MD
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA0  - Normal input      (BUTTON).
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ */
+#define VAL_GPIOACRL            0x88384B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB13 - Alternate output  (MMC SPI2 SCK).
+ * PB14 - Normal input      (MMC SPI2 MISO).
+ * PB15 - Alternate output  (MMC SPI2 MOSI).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0xB4B88888      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC4  - Normal input because there is an external resistor.
+ * PC6  - Normal input because there is an external resistor.
+ * PC7  - Normal input because there is an external resistor.
+ * PC10 - Push Pull output (CAN CNTRL).
+ * PC11 - Push Pull output (USB DISC).
+ * PC12 - Push Pull output (LED).
+ */
+#define VAL_GPIOCCRL            0x44848888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88833388      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif
-- 
cgit v1.2.3