From 0dc7f360a4c495a04553df27e6799428798b090f Mon Sep 17 00:00:00 2001 From: Vegard Storheil Eriksen Date: Sat, 21 May 2011 11:28:11 +0200 Subject: dos2unix --- board.h | 192 ++++++++++++++++++++++++++++++++-------------------------------- 1 file changed, 96 insertions(+), 96 deletions(-) (limited to 'board.h') diff --git a/board.h b/board.h index 8265944..f273db2 100644 --- a/board.h +++ b/board.h @@ -1,96 +1,96 @@ -#ifndef BOARD_H -#define BOARD_H - -#define STM32_HSECLK 8000000 - -#define STM32F10X_MD - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA0 - Normal input (BUTTON). - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - */ -#define VAL_GPIOACRL 0x88384B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB13 - Alternate output (MMC SPI2 SCK). - * PB14 - Normal input (MMC SPI2 MISO). - * PB15 - Alternate output (MMC SPI2 MOSI). - */ -#define VAL_GPIOBCRL 0x84888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0xB4B84488 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC4 - Normal input because there is an external resistor. - * PC6 - Normal input because there is an external resistor. - * PC7 - Normal input because there is an external resistor. - * PC10 - Push Pull output (CAN CNTRL). - * PC11 - Push Pull output (USB DISC). - * PC12 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x44008888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88833388 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif - -#endif +#ifndef BOARD_H +#define BOARD_H + +#define STM32_HSECLK 8000000 + +#define STM32F10X_MD + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + * PA0 - Normal input (BUTTON). + * PA2 - Alternate output (USART2 TX). + * PA3 - Normal input (USART2 RX). + */ +#define VAL_GPIOACRL 0x88384B88 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + * PB13 - Alternate output (MMC SPI2 SCK). + * PB14 - Normal input (MMC SPI2 MISO). + * PB15 - Alternate output (MMC SPI2 MOSI). + */ +#define VAL_GPIOBCRL 0x84888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0xB4B84488 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + * PC4 - Normal input because there is an external resistor. + * PC6 - Normal input because there is an external resistor. + * PC7 - Normal input because there is an external resistor. + * PC10 - Push Pull output (CAN CNTRL). + * PC11 - Push Pull output (USB DISC). + * PC12 - Push Pull output (LED). + */ +#define VAL_GPIOCCRL 0x44008888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88833388 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (XTAL). + * PD1 - Normal input (XTAL). + */ +#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif + +#endif -- cgit v1.2.3